Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 206)

Blocked listener applications (Continued) TABLE 36
Listener application Brocade DCX and DCX 8510 Backbone families Brocade switches
daytime Disabled Disabled
discard Disabled Disabled
echo Disabled Disabled
ftp Disabled Disabled
rexec Block with packet filter Disabled
rlogin Block with packet filter Disabled
rsh Block with packet filter Disabled
rstats Disabled Disabled
rusers Disabled Disabled
time Block with packet filter Disabled
Ports and applications used by switches
If you are using the FC-FC Routing Service, be aware that the secModeEnable command is not
supported.
The following table lists the defaults for accessing hosts, devices, switches, and zones.
Access defaults TABLE 37
Access default
Hosts Any host can access the fabric by SNMP.
Any host can Telnet to any switch in the fabric.
Any host can establish an HTTP connection to any switch in the fabric.
Any host can establish an API connection to any switch in the fabric.
Devices All devices can access the management server.
Any device can connect to any FC port in the fabric.
Switch access Any switch can join the fabric.
All switches in the fabric can be accessed through a serial port.
Zoning No zoning is enabled.
Ports and applications used by switches
206 Fabric OS Administrators Guide
53-1003130-01