Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 309)

The following example shows all zone aliases beginning with "arr":
switch:admin> alishow "arr*"
alias: array1 21:00:00:20:37:0c:76:8c
alias: array2 21:00:00:20:37:0c:66:23
The following example shows all zone aliases beginning with "arr", regardless of the case:
switch:admin> alishow --ic "arr*"
alias: array1 20:e0:00:05:33:11:1f:00
alias: array2 2f:11:00:05:33:c1:37:a2
Zone creation and maintenance
Fabric OS allows you to create zones to better manage devices.
NOTE
Broadcast Zone : To create a broadcast zone, use the reserved name "broadcast". Do not give a
regular zone the name of "broadcast". Refer to
Broadcast zones on page 303 for additional information
about this special type of zone.
Virtual Fabrics considerations: Zone definitions should not include logical port numbers. Zoning is not
enforced on logical ports.
Displaying existing zones
Use the following procedure to display a list of existing zones.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the cfgShow command.
Example of displaying existing zones
switch:admin> cfgshow
Defined configuration:
zone: matt 30:06:00:07:1e:a2:10:20; 3,2
alias: bawn 3,5; 4,8
alias: bolt 10:00:00:02:1f:02:00:01
alias: bond 10:00:05:1e:a9:20:00:01; 3,5
alias: brain 11,4; 22,1; 33,6
alias: jake 4,7; 8,9; 14,11
alias: jeff 30:00:00:05:1e:a1:cd:02; 40:00:00:05:1e:a1:cd:04
alias: jones 7,3; 4,5
alias: zeus 4,7; 6,8; 9,2
Effective configuration:
No Effective configuration: (No Access)
Zone creation and maintenance
Fabric OS Administrators Guide 309
53-1003130-01