Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 75)

2-45
IM 04L31A01-17E
2
Ethernet Interface
• Setting the Ref.time
45.
Use the arrow keys to move the cursor to the [Ref.time] box.
46. Press the [Input] soft key. An entry box appears.
47. Enter the reference time in the entry box.
48. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The reference time that you entered is displayed in the [Ref.time] box.
• Selecting to include instantaneous values (contents of the transmitted e-mail)
49.
Follow the procedures of steps 29 and 30.
• Selecting to include the source URL (contents of the transmitted e-mail)
50.
Follow the procedures of steps 31 and 32.
• Setting the e-mail subject (contents of the transmitted e-mail)
51.
Follow the procedures of steps 33 through 36.
• Setting the e-mail header (contents of the transmitted e-mail)
52.
Follow the procedures of steps 37 through 40.
• Confirming or Canceling the Settings
53.
To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Setting [System E-Mail settings]
• Setting the e-mail recipient
54.
Follow the procedures of steps 25 and 26.
• Selecting to include the source URL (contents of the transmitted e-mail)
55.
Follow the procedures of steps 31 and 32.
• Setting the e-mail subject (contents of the transmitted e-mail)
56.
Follow the procedures of steps 33 through 36.
• Setting the e-mail header (contents of the transmitted e-mail)
57.
Follow the procedures of steps 37 through 40.
2.11 Setting the E-mail Transmission Function