Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 20)

1-3
IM 04L31A01-17E
Functional Explanation
1
Ethernet
E-mail
transmission
E-mail
reception
Portable phone
PC
FTP server
Internet
CX
Note
• For the procedure in setting the e-mail transmission function, see section 2.11.
• For e-mail transmission examples, see section 2.13.
• For the procedure to start/stop e-mail transmission, see section 2.13.
• You can test to see whether e-mail messages are sent properly. The test results can be
confirmed on the e-mail log display. For the procedure of the e-mail transmission test, see
section 2.12.
Web Server
You can use a Web browser (Microsoft Internet Explorer) on your PC that is connected
to the network to display the CX screen. This function can be used to achieve remote
monitoring and monitoring over a wide area.
Two types of Web pages can be displayed.
• Monitor page
Page dedicated to monitoring.
• Operator page
This page allows you to switch the CX displays. You can also modify and write
messages.
Note
You can use the CX as a Web server by setting the Ethernet interface (section 2.3) and the Web
server function (section 2.9). In addition, you can restrict the access to each Web page by
setting the access control (section 2.9).
1.2 Ethernet Communication Function