Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 60)

2-30
IM 04L31A01-17E
20. Press the [Input] soft key. An entry box appears.
21. Enter the password in the entry box.
22. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The password that you entered is displayed in the [Password] box.
Setting the Monitor Page
• Turning On/Off the monitor page
23.
Use the arrow keys to move the cursor to the [On/Off] box.
24. Press the [On] or [Off] soft key.
If you selected [On] proceed to step 25; if you selected [Off] proceed to step 28.
• Turning On/Off access control
25.
Follow the procedures of steps 13 and 14.
• Setting the user name
26.
Follow the procedures of steps 15 through 18.
• Setting the password
27.
Follow the procedures of steps 19 through 22.
Confirming or Canceling the Settings
28. To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
29. Press the ESC key several times to display the basic setting menu.
30. Press the [End] soft key. A dialog box appears for you to select whether to save
the settings.
31. To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
2.9 Setting the Web Server Function