Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 140)

6-11
IM 04L31A01-17E
Command
6
Command Command Function Execution mode ADMINISTRATOR USER Page
Type Name
Setup, Measurement, and computation Data Output
FC Outputs the screen image data All modes Yes Yes 6-55
FE Outputs the setup data All modes Yes Yes 6-55
FD Outputs the newest measured/computed/ Operation mode Yes Yes 6-56
control data
FF Outputs FIFO data Operation mode Yes Yes 6-56
FL Outputs log, alarm summary, and message All modes Yes Yes 6-56
summary
FS Outputs alarm types and setting value for All modes Yes Yes 6-57
measurement/computation/control channel
FT Outputs max/min/decimal point of span for All modes Yes Yes 6-57
measurement/computation/control channel
IS Outputs status information All modes Yes Yes 6-57
FU Outputs the user level All modes Yes Yes 6-57
ME Outputs the data stored on the external Operation mode Yes No 6-57
storage medium (usable through either
Ethernet or serial communications)
MI Outputs display data and event data in the Operation mode Yes No 6-57
internal memory (usable through either
Ethernet or serial communications)
MO Outputs TLOG data, manual sample data, Operation mode Yes No 6-58
and report data in the internal memory
(usable through either Ethernet or serial communications)
RS-422/485 Dedicated Commands
ESC O Opens the device All modes Yes Yes 6-59
ESC C Closes the device All modes Yes Yes 6-59
Yes: Command usable
No: Command not usable
Output Commands (Control)
Command Command Function Execution mode ADMINISTRATOR USER Page
Type Name
output commands
FP Outputs the SP number and PID number. All modes Yes Yes 6-59
FM Outputs the control mode. All modes Yes Yes 6-59
FH Outputs the program operation mode. All modes Yes Yes 6-59
FJ Outputs program pattern information that All modes Yes Yes 6-60
is currently in execution.
FK Outputs PV event/time event information. All modes Yes Yes 6-60
FN Outputs the DI/DO data and internal All modes Yes Yes 6-60
switches status.
FO Outputs the status (active/inactive) of DIO All modes Yes Yes 6-60
operation monitoring function setting and
operation mode (automatic/manual).
FW Outputs the information on pattern numbers, All modes Yes Yes 6-60
operation status, and assigned loops.
DQ Outputs the SP number and PID number of All modes Yes Yes 6-60
external loops.
DR Outputs the control mode of external loops. All modes Yes Yes 6-60
FV Outputs the status of the program control All modes Yes Yes 6-61
end signal
Yes: Command usable
No: Command not usable
6.2 A List of Commands