Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 246)

9-13
IM 04L31A01-17E
9
Green Series Communications
25. If you selected a UT Series controller for the connecting model, set the control
mode, control output type, and alarm type.
Confirming or Canceling the Settings
26. To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
27. Press the ESC key several times to display the basic setting menu.
28. Press the [End] soft key. A dialog box appears for you to select whether to save
the settings.
29. To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
Note
To activate the settings that have been changed in the basic setting mode, the settings must be
saved. Otherwise, the settings that existed before the change are activated.
9.4 External Loop Setting > Basic Setting