Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 302)

App-43
IM 04L31A01-17E
App
Appendix
D8155
D8156
D8157
:
D8170
D8171
D8172
D8173 to D8180
D8181 to D8186
D8187 to D8192
D8193 to D8198
D8199 to D8204
D8205 to D8210
D8211 to D8300
D8301 to D8306
D8307 to D8312
D8313 to D8318
0-59* 3
0-59* 3
0-59* 3
:
0-59*
3
0-59* 3
0-59* 3
0:OFF
1:ON
2:Unlimited repetitions
0-999. However, active only
when repeat setting is 1 (ON).
0-999
1-99
1-99
0:None
1: pattern end
R
R
R
:
R
R
R
:
R
R
R
R
R
R
R
R
D Register
Number
Description Register Type Value
Read/
Write
Switch time of pattern id1, and elapsed
wait time (hh) when waiting.
Switch time of pattern id1, and elapsed
wait time (mm) when waiting.
Switch time of pattern id1, and elapsed
wait time (ss) when waiting.
:
Switch time of pattern id6, and elapsed
wait time (hh) when waiting.
Switch time of pattern id6, and elapsed
wait time (mm) when waiting.
Switch time of pattern id6, and elapsed
wait time (ss) when waiting.
Reseved
Repeat setting of pattern id1–6
Repeat count of pattern id1–6
Remaining repeat count of pattern id1–6
Repeat start number of pattern id1–6
Repeat end number of pattern id1–6
Reserved
Pattern end signal of pattern id1–6
Time event status of pattern id1–6
PV event status of pattern id1–6
Note
The relation between pattern id and pattern number is determined by reading the
operating/stopped registers (D8107–D8112).
Appendix 6 Register Assignments