Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 252)

9-19
IM 04L31A01-17E
9
Green Series Communications
Procedure
For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page ix.
1. Press the MENU key.
The Setting mode (Control) display appears.
2. Press the FUNC key for approximately 3 s.
The Basic setting menu appears.
3. Press the [#10] (Control) soft key ([#12] (Control) soft key on the CX1000).
The Control menu appears.
4. Press the [#6] (External loop setting) soft key ([#8] (External loop setting) soft
key on the CX1000).
The Control (External loop setting) menu appears.
5. Press the [#3] (Tuning setting) soft key.
The External loop setting (Tuning setting) display appears.
CX1000 Tuning setting display CX2000 External loop setting (Tuning setting) display
Selecting the Loop Number
6. Use the arrow keys to move the cursor to the [Loop number] box.
7. Press one of the soft keys from [Ext1] to [Ext16] ([Ext1] to [Ext4] on the CX1000)
to select the external loop number.
9.6 External Loop Setting > Tuning Setting