Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 59)

2-29
IM 04L31A01-17E
2
Ethernet Interface
Setting the Operator Page
• Turning On/Off the operator page
9.
Use the arrow keys to move the cursor to the [On/Off] box.
10. Press the [On] or [Off] soft key. If you selected [On] proceed to step 11; if you
selected [Off] proceed to step 28.
• Turning On/Off the use of command input
11.
Use the arrow keys to move the cursor to the [Command] box.
12. Press the [On] or [Off] soft key.
• Turning On/Off access control
13.
Use the arrow keys to move the cursor to the [Access control] box.
14. Press the [On] or [Off] soft key. If you selected [On] proceed to step 15; if you
selected [Off] proceed to step 28.
• Setting the user name
15.
Use the arrow keys to move the cursor to the [User name] box.
16. Press the [Input] soft key. An entry box (numeric value input pop-up window)
appears.
17. Enter the user name in the entry box.
18. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The user name that you entered appears in the [User name] box.
• Setting the password
19.
Use the arrow keys to move the cursor to the [Password] box.
2.9 Setting the Web Server Function