Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 69)

2-39
IM 04L31A01-17E
2
Ethernet Interface
• Subject
Set the subject of the e-mail message using up to 32 alphanumeric characters.
The default value is “(CX)Alarm_summary.”
• Header 1
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
• Header 2
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
Settings When Transmitting E-mail Messages at the Specified Time
• Recipient 1, Recipient 2
You can turn On/Off the function for each recipient.
• On
Transmits e-mail messages to the recipient.
• Off
Does not transmit e-mail messages to the recipient.
• Interval
Time interval used to repeat the e-mail transmission starting from the [Ref.time].
Select from the following:
OFF, 1h, 2h, 3h, 4h, 6h, 8h, 12h, and 24h
• Ref. time
Set the time “hour:minute” to transmit the e-mail message. The e-mail
transmission is repeated every interval from this point. Specify the time in the
following range for each recipient.
00:00 to 23:59
Example: If Reference time is 17:15 and Interval is 8h, e-mail messages are
transmitted at 17:15, 01:15, and 09:15.
• Contents of the transmitted mail
• Including instantaneous values
• On
Includes the instantaneous values of all channels at the time of e-mail
transmission in the e-mail message.
• Off
The instantaneous values are not included in the e-mail message.
• Including the source URL (Uniform Resource Locator)
• On
If the Web server function is specified on the CX, the URL of the CX is
attached to the e-mail.
• Off
The URL of the CX is not attached to the e-mail.
• Subject
Set the subject of the e-mail message using up to 32 alphanumeric characters.
The default value is “(CX)Periodic_data.”
• Header 1
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
• Header 2
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
2.11 Setting the E-mail Transmission Function