Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 6)

v
IM 04L31A01-17E
How to Use This Manual
Structure of the Manual
This user’s manual consists of the following sections.
Chapter 1 Functional Explanation
Describes the relationship between the communication functions and the interface and
gives an overview of the communication functions.
Chapter 2 Ethernet Interface
Describes the specifications and setup procedures of the Ethernet interface. Describes
the FTP client function, Web server function, and e-mail transmission function. Also
describes how to display the log screen.
Chapter 3 Serial Interface
Describes the specifications and setup procedures of the serial interface. There are
two types of serial interfaces: RS-232 and RS-422/485.
Chapter 4 Modbus Protocol
Describes the specifications and setup procedures of the Modbus protocol and the
status indication screen of the Modbus master.
Chapter 5 Ladder Communication Protocol
Describes the specifications, the setup procedures, and program samples of the ladder
communication protocol.
Chapter 6 Commands
Describes each command that is available.
Chapter 7 Responses
Describes the panel setup information that the CX outputs and the measured/
computed/control data formats.
Chapter 8 Status Reports
Describes the status information.
Chapter 9 Green Series Communications
Describes the setup procedures of the Green series communication function.
Appendix
Provides an ASCII character code table, setup flow charts for outputting data from the
CX, and a list of messages.
Index
Index of contents.