Output of pv event/time event information, Output of pv event/time event information -14 – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 206

7-14
IM 04L31A01-17E
Example
EA
PTNO 5
SEGNO 10
PRE_SEGNO 2
SEGUSE 7
SEGTM 11:05:22
WAITTM 00:06:00
RCYMOD 1
ALL_RCY 20
REM_RCY 2
RST 3
REN 6
PTN_START_DATE 02/01/03
PTN_START_TIME 10:00:00
PTN_STOP_DATE 02/01/05
PTN_STOP_TIME 10:00:00
EN
Output of PV Event/Time Event Information
• The FK command is used to output the data.
• When in program operation, the statuses of the current PV event and time event are
output. When not in program operation, zeroes are output for the statuses of the PV
event and time event.
Syntax
EA
CRLF
xxx.xxx.xxx.xxx
CRLF
yyy.yyy.yyy.yyy
CRLF
EN
CRLF
xxx
• The statuses of bits 31 to 24, 23 to 16, 15 to 8, and 7 to 0 are
indicated in order in decimal notation.
• The occurrence of PV events 1 to 16 is indicated by the status of
bits 0 to 15. Thus, the upper two digits of xxx are zeroes.
0: Event not occurring, 1: Event occurring
31
0
1
2
3
4
5
10
11
12
13
14
15
6
7
8
9
Bit
yyy
• The statuses of bits 1 to 24, 23 to 16, 15 to 8, and 7 to 0 are
indicated in order in decimal notation.
• The occurrence of time events 1 to 16 is indicated by the status of
bits 0 to 15. Thus, the upper two digits of xxx are zeroes.
0: Event not occurring, 1: Event occurring
Example
When PV event 1 and time events 2 and 3 are occurring.
EA
000.000.000.001
000.000.000.006
EN
7.2 Output Format of ASCII Data