Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 200)

7-8
IM 04L31A01-17E
Decimal Point Position/Unit Information
• The FE command is used to output the data.
Syntax
The data is output for each channel in the following syntax.
EACRLF
s_cccuuuuuu,ppCRLF
..................
ENCRLF
s Data status (N, D, S)
N: Normal
D: Differential input
S: Skip (When the measurement range is set to SKIP for a
measurement channel or when the channel is turned OFF for
a computation channel)
ccc Channel number
0xx: Measurement channel (001 to 020) (001 to 006 on the CX1000)
Axx: Computation channel (A31 to A60) (A31 to A42 on the CX1000)
1xx: Internal control channel (101 to 118) (101 to 106 on the CX1000)
2xx: External control channel (201 to 248) (201 to 212 on the CX1000)
uuuuuu Unit information (6 characters, left-justified)
mV____: mV
V_____: V
^C____: °C
xxxxxx: (User-defined character string)
pp Decimal point position (00 to 04)
No decimal point (00000) for 00.
One digit to the right of the decimal (0000.0) for 01.
Two digits to the right of the decimal (000.00) for 02.
Three digits to the right of the decimal (00.000) for 03.
Four digits to the right of the decimal (0.0000) for 04.
_ Space
Example
EA
N 001mV ,01
N 002mV ,01
EN
7.2 Output Format of ASCII Data