Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 57)

2-27
IM 04L31A01-17E
2
Ethernet Interface
• Selecting whether to use command input
• On
Enables the use of message setting/writing commands.
• Off
Disables the use of message setting/writing commands.
• Selecting whether to use access control
• On
Enables the use of access control. You must enter the user name and
password to display the operator page.
• Off
Disables the use the access control.
• Setting the user name
Enter the user name using up to 16 characters.
• Setting the password
Set the password using up to six alphanumeric characters.
Saving the Settings
To activate the settings that have been changed in the basic setting mode, the
settings must be saved. Otherwise, the settings that existed before the change are
activated.
Setting the Time Difference from Greenwich Mean Time
See section 3.7, “Changing the Time Zone” in the user’s manual IM 04L31A01-01E or
IM 04L31A01-03E
.
2.9 Setting the Web Server Function