Yokogawa Touch Screen GP20 - Manual (Page 92)

1-78
IM 04L51B01-01EN
1.8 Setting Recording Conditions (Recording mode,
recording interval, saving interval)
Set the type of data to record (display or event data), the recording interval, and the interval
for saving measurement data files to an SD memory card.
1.8.1 Setting the Type of Data to Record (Display or event data) and Recording
Conditions
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu Recording settings > Basic
settings
Web browser: Config. tab > Recording settings > Recording basic settings
Hardware configurator: Recording settings > Recording basic settings
Description
Recording mode
Setup Item Selectable Range or Options Default Value
File type Display, Display + Event, Event GX10/GX20: Display
GP10/GP20: Event
File type
Set the type of data to record.
Setup Item Description
Display Records display data
Display + Event Records display and event data
Event Records event data
Display Data, Trend Waveform
Setup Item Selectable Range or Options Default Value
Saving interval 1 10min, 20min, 30min, 1h, 2, h, 3h, 4h, 6h,
8h, 12h, 1day, 2day, 3day, 5day, 7day, 14day,
31day
2
1 Does not appear when the file type is set to Event.
2 The minimum effective saving interval based on the trend interval of display data and the
number of recording channels.
Note
• The maximum number of channels that the GX20/GP20 can record varies depending on the
trend interval.
Trend Interval (Unit: /div) Number of Channels That Can Be Recorded on the GX20/GP20
5 s 100
10 s 200
15 s or more 500
• The GX10/GP10 can record up to 100 channels regardless of the trend interval.