Yokogawa Touch Screen GP20 - Manual (Page 149)

1-135
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Channel type
When the type is set to Read, only communication channels are available.
When the type is set to Write, set the channel type of the data to send.
First-CH, Last-CH
Set the first channel number and the last channel number in accordance with the channel
type.
1.16.7 Configuring the Server Function
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > Server settings > Server function
Web browser: Config. tab > Communication (Ethernet) settings > Server function
Hardware configurator: Communication (Ethernet) settings > Server function
Description
Keep alive function
Setup Item Selectable Range or Options Default Value
On/Off Off, On On
On/Off
Set this to On to disconnect when there is no response to test packets that are periodically
sent. Otherwise, set this to Off.
Timeout function
Setup Item Selectable Range or Options Default Value
On/Off Off, On Off
Timeout (minute) 1 to 120 1
On/Off
Select On to use the communication timeout function.
Timeout (minute)
Set the timeout value.
FTP server
Setup Item Selectable Range or Options Default Value
Output Directory Format MS-DOS, UNIX UNIX
Output Directory Format
Sets the directory output format.
Modbus server
Setup Item Selectable Range or Options Default Value
Modbus delay response Off, 10ms, 20ms, 50ms Off
Modbus delay response
To delay the responses to queries from the client, set the response delay value.
1.16 Configuring the Ethernet Communication Function