Yokogawa Touch Screen GP20 - Manual (Page 157)

1-143
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
1.18.3 Setting the Alarm Display Hold/Nonhold Operation
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Alarm
basic settings
Web browser: Config. tab > System settings > Alarm basic settings
Hardware configurator: System settings > Alarm basic settings
Description
Indicator
Setup Item Selectable Range or Options Default Value
Hold/Nonhold Hold/Nonhold Nonhold
Hold/Nonhold
Set the alarm display behavior.
Options Description
Nonhold Clears the alarm indication when the alarm condition is released (returns to
normal condition).
Hold Holds the alarm indication until an alarm acknowledge operation is
performed.
1.18.4 Setting the Time Zone, Gradual Time Adjustment, and Daylight Saving
Time
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Time basic
settings
Web browser: Config. tab > System settings > Time basic settings
Hardware configurator: System settings > Time basic settings
Description
Time zone
Setup Item Selectable Range or Options Default Value
Hour -13 to 13 9
Minute 0 to 59 0
Hour, Minute
Set the time zone of the region in which the GX/GP will be used in terms of the time
difference from GMT. A negative value indicates that the local time is behind the GMT.
Example: The standard time in Japan is ahead of the GMT by 9 hours. In this case, set Hour
to 9 and Minute to 0.
Gradually adjusting the time
Setup Item Selectable Range or Options Default Value
Time deviation limit Off, 5s, 10s, 15s 5s
Time adjustment beyond limit Not Change the time/Change the time Not Change the time
Time deviation limit
To gradually correct the time when the time is changed while recording is in progress, set
the deviation limit for gradually correcting the time. Only when the time deviation between
the GX/GP’s time and the specified time is within ±(the value that you specify here) is the
GX/GP’s time gradually corrected. Otherwise, the time is corrected according to Time
adjustment beyond limit.
1.18 Configuring System Settings (Time zone, display language, status relay, etc.)