Yokogawa Touch Screen GP20 - Manual (Page 239)

2-55
IM 04L51B01-01EN
Operating the GX/GP
1
2
3
4
5
App
2.5 Saving Various Types of Data
This section explains how to save various types of data.
2.5.1 Automatically Saving Measured Data
Measured data is saved automatically when in Data save settings, Media save Auto save
is set to On.
The save destination is an SD memory card.
Have an SD memory card inserted in the slot at all times. While recording, the measured
data recorded in the internal memory is automatically saved to the SD memory card.
Behavior when Media FIFO is not enabled: If data storage to the storage medium is not
complete such as due to insufficient free space, the unsaved data is saved the next time the
data is automatically saved.
2.5.2 Manually Saving Measured Data (Collectively saving unsaved data)
Manual saving of measured data is possible when in Data save settings, Media save Auto
save is set to Off.
The save destination is an SD memory card or USB flash memory (/UH option). The
procedure below is for saving unsaved data to an SD memory card.
Procedure
1
Set an SD memory card in the slot.
The media operation screen appears.
2
Tap Save manual.
The unsaved data in the internal memory is saved to the SD memory card.
3
Remove the SD memory card by following the procedure below.
Tap the MENU key > Media eject icon > SD.
When the message “Media can be removed safely” appears, remove the SD memory
card.
Operation complete
For details on manually saving from the memory summary, see page 2-36 in section 2.3.3,
“Displaying a List of Data Files in the Internal Memory (Memory summary)”.
Note
• If there is not enough space on the storage medium, the message “Not enough free space
on media” appears, and the data is not saved. If this message appears, replace the storage
medium. Then, carry out the procedure again.
• You cannot abort a data save operation while it is in progress.
2.5.3 Manually Saving Instantaneous Values of Measured Data (Manual
sample)
This section explains how to save the instantaneous values of channels whose manual
sample recording is enabled (excluding those set to Skip or Off) through touch operation.
Procedure
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Manual sample.
Manual sampling is executed.
Operation complete