Yokogawa Touch Screen GP20 - Manual (Page 264)

3-12
IM 04L51B01-01EN
Setting the Date and Time
Follow the procedure below to set the GX/GP’s date and time.
Procedure
1
On the Operation tab, click Date/Time Settings.
The Date/Time settings dialog box appears.
2
Enter the date and time, and click Change.
The GX/GP’s date and time are changed.
You may not be able to change the time depending on the GX/GP settings or
condition. Follow the instructions in the message to handle it.
Starting Mail Transmission
Follow the procedure below to enable the mail transmission function.
Procedure
1
On the Operation tab, click E-Mail function.
The Mail function dialog box appears.
2
Click Start E-mail transmission.
Mail transmission starts.
Stopping Mail Transmission
Follow the procedure below to stop the mail transmission function.
Procedure
1
On the Operation tab, click E-Mail function.
The Mail function dialog box appears.
2
Click Stop E-mail transmission.
Mail transmission stops.
Triggering the Starting of Event Data Recording
Follow the procedure below to apply a start trigger for event data recording.
Procedure
1
On the Operation tab, click Event trigger.
The Event trigger dialog box appears.
2
Click Execute event trigger.
Event data recording that is in the trigger-wait state starts.
Resetting a Relative Timer
Follow the procedure below to reset and start a relative timer.
Procedure
1
On the Operation tab, click Timer reset.
The Timer reset dialog box appears.
2
Click the timer you want to reset.
The timer is reset.
3.1 Using a Web Browser to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)