Auto save timing – Yokogawa Touch Screen GP20 User Manual
Page 108
1-94
IM 04L51B01-01EN
Auto Save Timing
Data Type
Description
Display data
The file is saved when the file is created.
Time
Saved to storage medium
File
File
File
Event data
Same as the display data.
Manual
sampled data
The first time manual sample is executed, a manual sampled data file is
created on the SD memory card. The data is appended to this file for each
subsequent manual sample operation. A new file is created after manual
sampled data is stored 100 times.
For operating instructions, see page 2-55 in section 2.5.3, “Manually Saving
Instantaneous Values of Measured Data (Manual sample)”.
Report data
The first time report data is generated, a report data file is created on the SD
memory card and report data is stored. The report data is appended to this file
every time a report is created.
Dividing of the report files
The appending of the report data to the file is stopped at a specified time, and
subsequent reports are saved to a new file. The file is divided in the unit shown
in the table below. Also, when recording is stopped, all report files are divided.
Report template
Every time a report file is divided, a report file is created according to the
specified template format such as an XML spreadsheet format or PDF format.
The report file can also be printed.
For the setup procedure, see page 1-98 in section 1.11, “Configuring the Report
Report kind
Report File
Separate
Combine
Hourly and daily
reports
a file for each daily report
hourly reports for a day and a daily
report
hourly reports for a day
Daily and weekly
reports
a file for each weekly report
daily reports for a week and a weekly
report
daily reports for a week
Daily and monthly
reports
a file for each monthly report
daily reports for a month and a
monthly report
daily reports for a month
Batch reports
a file for each recording start/
stop operation The file will be
divided if the number of data entries
exceeds 200.
a file for each recording start/stop
operation The file will be divided if the
number of data entries exceeds 200.
Day custom
a file for each file creation unit
a file for each file creation unit
1.9 Setting the Conditions for Saving Data Files