Yokogawa Touch Screen GP20 - Manual (Page 85)

1-71
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Value indicator
Set the value indicator type.
Bar graph
Mark
Digit of mark
Set the number of channel number digits to display for the digit of mark. If set to zero, the
channel number is not displayed.
Partial
Setup Item Selectable Range or Options Default Value
On/Off Off, On Off
On/Off
Set this to On to enable the partial expanded display function. You can set this for AI
channels, math channels, and communication channels.
By compressing a section of the waveform display range, the rest of the section is
expanded.
In the example below, 0 V (boundary value) is moved to the 30% position of the display
range (new boundary position). The 30% area below the boundary corresponds to “–6 V to
0 V” and 70% area above the boundary corresponds to “0 V to 6 V.”
Percentage with
respect to the
display span
100
Percentage with
respect to the
display span Measured value
Boundary
value
New
boundary
position
Measured value
100
30 0
50 0
6V 6V
0 –6 V –6 V 0
Reduce
section
Time axis Time axis
When partial expanded display
is used
When partial expanded display
is not used
Expanded section
1.6 Setting Display Conditions