Yokogawa Touch Screen GP20 - Manual (Page 182)

1-168
IM 04L51B01-01EN
1.24 Initializing and Calibrating the System
(Initialization, reconfiguration, touch screen
calibration)
Initialize the settings or the internal memory, reconfigure the GX/GP, and calibrate the touch
screen.
1.24.1 Initializing the Settings and the Internal Memory
Path
GX/GP: MENU key > Browse tab > Initialize Calibration > Menu Initialize
Description
Setup Item Selectable Range or Options Default Value
Initialize all Off, On Off
Initialize all
Set this to On to initialize all settings and return the GX/GP to its factory default condition.
However, the A/D calibration password is not initialized.
Setup Item Selectable Range or Options Default Value
Security settings Off, On Off
Other than Security settings Off, On Off
Security settings
Set this to On to initialize the security settings.
Other than Security settings
Set this to On to initialize settings other than the security settings.
Setup Item Selectable Range or Options Default Value
Internal Data Off, On Off
Internal data
Set this to On to initialize all data in the internal memory.
Procedure
Initializing All Settings
1
Press MENU.
The menu screen appears.
2
Tap the Browse tab and then Initialize Calibration.
The menu screen appears.
3
Tap Initialize all under Initialize and then On.
4
Tap Execute.
A confirmation screen is displayed.
5
Tap OK.
The settings are initialized.
Operation complete