Yokogawa Touch Screen GP20 - Manual (Page 216)

2-32
IM 04L51B01-01EN
2.2.9 Registering and Showing the Standard Display
Procedure
Registering the Standard Display
1
Show the display that you want to register as the standard display.
2
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Standard display.
The standard display setting screen appears.
3
Tap OK.
The standard display is registered.
Operation complete
Showing the Standard Display
1
Press MENU.
The menu screen appears.
2
Tap the Standard icon.
The standard display is shown.
Shows the standard display
Operation complete
Note
If you register the standard display on the historical trend screen, the trend display of the displayed
group will be registered as the standard display.
2.2 Configuration of Measured Data Display