Yokogawa Touch Screen GP20 User Manual
Page 222
2-38
IM 04L51B01-01EN
• When Saving All Data, Manual Sampled Data, or Report Data
1
Press
MENU.
The menu screen appears.
2
Tap the
Context tab and then All save or Report save.
The all data or report data save screen appears.
3
Set the save destination, and tap
OK.
The data is saved.
Operation complete
Note
To cancel the data save operation, carry out the following procedure.
MENU > Universal > Save stop
• Progress Indication When Saving the Data in the Internal Memory
If you execute
Select save, All save, M. sample save, or Report save on the memory
summary display, the progress of the operation is indicated on the screen.
Note
• This screen appears only when the memory summary display is showing.
• If you tap the
Close icon, the screen will temporarily disappear but will reappear about 10
seconds later.
• The estimated length of time to save all data is shown in the table below (when the memory is
full of data). It will take longer depending on the GX/GP operating conditions.
Estimated Length of Time to Save All Data
Save Destination
SD memory card, USB flash memory
Internal memory size (500 MB)
Approx. 30 minutes
• To cancel the data save operation, carry out the following procedure.
MENU > Universal > Save stop (when saving all data or report data)
2.3 Displaying Various Types of Information