5 setting the sntp client function, 5 setting the sntp client function -130, System settings – Yokogawa Touch Screen GP20 User Manual
Page 144: Sntp client function
1-130
IM 04L51B01-01EN
Attach instantaneous data
Set this to
On to include instantaneous data. The data that is attached is the instantaneous
value at the scheduled times.
Interval (Recipient 1)
Set the interval for transmitting e-mails to recipient 1.
Ref. time hour, Ref. time minute (Recipient 1)
Set the time used as a reference for sending e-mails at specific intervals to Recipient 1.
Interval (Recipient 2)
Set the interval for transmitting e-mails to recipient 2.
Ref. time hour, Ref. time minute (Recipient 2)
Set the time used as a reference for sending e-mails at specific intervals to Recipient 2.
System settings
Setup Item
Selectable Range or Options
Default Value
Memory full notification
Off, Recipient 1, Recipient 2, Recipient 1 & Recipient 2
Off
Power failure notification Off, Recipient 1, Recipient 2, Recipient 1 & Recipient 2
Off
System error notification Off, Recipient 1, Recipient 2, Recipient 1 & Recipient 2
Off
Memory full notification
Sends a message when the free space on the external storage medium or internal memory
is low.
For details, see page 1-147 in section 1.18.6, “Setting the FAIL Relay and Instrument
Information Output (/FL option)”
Power failure notification
Set recipients if you want e-mails to be sent when the GX/GP is powered on or recovers
from a power failure.
System error notification
Set recipients if you want e-mails to be sent when system errors occur.
Mail Format
See page 3-55 in section 3.2.5, “E-mail Format”.
1.16.5 Setting the SNTP Client Function
Path
GX/GP:
MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > SNTP client settings
Web browser:
Config. tab > Communication (Ethernet) settings > SNTP client settings
Hardware configurator:
Communication (Ethernet) settings > SNTP client settings
Description
SNTP client function
Setup Item
Selectable Range or Options
Default Value
On/Off
Off, On
Off
On/Off
Select
On to use the SNTP client function.
1.16 Configuring the Ethernet Communication Function