Yokogawa Touch Screen GP20 - Manual (Page 292)

3-40
IM 04L51B01-01EN
Operation Example 3
This example shows how to assign channels to group 1 on the screen that appears when
you click Display settings and then Group settings.
Select the check box. Click to open the group settings dialog box (figure below).
Group settings dialog box
Selected
channels
Show or hide by channel.
Select the
channel check
boxes to add
the channels
to the group.
Click OK to apply the settings
to the configuration screen.
Group
configuration
channels
Note
If the maximum number of selectable channels is reached, you will no longer be able to select
additional channels.
Operation Example 4
This example shows how to set the alarm output destination on the DI channel settings
screen.
Select the check box. Click to open the Alarm level 1 Output No.
dialog box (figure below).
Alarm level 1 Output No. dialog box
The internal switch
number that you click is
reflected in the setup
screen and the dialog
box closes.
To not change or set
click Cancel to return.
3.1 Using a Web Browser to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)