Yokogawa Touch Screen GP20 - Manual (Page 252)

2-68
IM 04L51B01-01EN
2.10.2 Changing the Password
You can carry out this procedure when in Security settings, under Basic settings, Security
Touch operation is set to Login.
Procedure
1
Press MENU.
The menu screen appears. If Operation without Login is set to OFF, a password input screen
will appear.
2
Tap the Universal tab and then Change password.
The screen for changing the password appears.
3
Tap Old Password, and enter the old password.
4
Tap New Password, and enter the new password.
5
Tap New Password Again, and enter the new password.
6
Tap OK.
The screen closes, and the new password takes effect.
7
Tap the Exit icon to close the menu screen.
Operation complete
Note
Default password: default
2.10 Allowing Only Registered Users to Operate