Yokogawa Touch Screen GP20 - Manual (Page 119)

1-105
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
1.13 Setting the Timers
Set the timers that are used in the event action function and the TLOG computation of the
math function (/MT option). There are two types of timers: absolute and relative. You can set
up to four timers for each type. You cannot change timers during recording or computing.
1.13.1 Setting the Timers
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu Timer settings > Timer Timer
1 to 4
Web browser: Config. tab > Timer settings > Timer
Hardware configurator: Timer settings > Timer
Description
Type
Setup Item Selectable Range or Options Default Value
Type Off/Relative/Absolute Off
Type
Set the timer type.
Options Description
Relative timer Times out at specified intervals.
Absolute timer Expires at the times determined by the reference time and the interval.
Interval 1
Setup Item Selectable Range or Options Default Value
Day 2 0 to 31 0
Hour 2 0 to 23 1
Minute 2 0 to 59 0
Interval 3 1min, 2min, 3min, 4min, 5min, 6min, 10min,
12min, 15min, 20min, 30min, 1h, 2, h, 3h, 4h,
6h, 8h, 12h, 24h
1h
1 Appears when the type is not set to Off.
2 Appears when the type is set to Relative timer.
3 Appears when the type is set to Absolute timer.
Day, Hour, Minute
Set the interval for the relative timer.
Interval
Set the interval for the absolute timer.
Action on Math Start 1
Setup Item Selectable Range or Options Default Value
Reset Off, On On
1 Appears when the type is set to Relative timer.
Reset
Set this to On to reset the timer when starting computation. Set this to Off to not reset. The
timer does not expire (if the timer is specified as an event, the action will not be executed).