Yokogawa Touch Screen GP20 - Manual (Page 204)

2-20
IM 04L51B01-01EN
Writing an Added Message
You can add messages to past data.
See page 2-24 in section 2.2.7, “Displaying Previously Measured Data (Historical trend
display)”.
• Writing a Registered Message
1
Display the historical trend, and drag the scale image to align the left edge of the scale
image to the write position.
2
Press MENU.
The menu screen appears.
3
Tap the Context tab and then Message.
A message list appears.
4
Select the message field to write to, and tap OK.
The message is written.
Operation complete
Shortcut Icon Operation (for registered and free messages)
You can touch the screen to display shortcut icons; you do not have to display the menu
screen first.
You can tap these shortcut icons to operate the GX/GP.
• Writing a Free Message
You can create a message on the spot and write it.
1
Display the historical trend, and drag the scale image to align the left edge of the scale
image to the write position.
2
Press MENU.
The menu appears.
3
Tap the Context tab and then Free message.
A message list appears.
4
Tap the message field to write in.
A keyboard will appear.
5
Set the message to write, and tap OK.
The message that you entered is written.
Operation complete
2.2 Configuration of Measured Data Display