Yokogawa Touch Screen GP20 - Manual (Page 163)

1-149
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
1.18.7 Setting the Printer Output Conditions
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Printer
settings
Web browser: Config. tab > System settings > Printer settings
Hardware configurator: System settings > Printer settings
Description
Setup Item Selectable Range or Options Default Value
IP Address 0.0.0.0 to 255.255.255.255 0.0.0.0
Paper size A4, A3, Letter A4
Page orientation Vertical, Horizontal Vertical
Resolution (dpi) 300dpi, 600dpi 300dpi
Number of copies 1 to 10 1
Snapshot Off, On Off
IP address
Set the IP address of the printer.
Paper size
Set the size of the paper to print.
Page orientation
Set the print orientation.
Resolution (dpi)
Set the print resolution.
Number of copies
Set the number of copies to print.
Snapshot
Set this to On to print a snapshot.
1.18.8 Configuring the Sound (Touch sound and warning sound) and LED
Settings
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Sound,
LED
Web browser: Config. tab > System settings > Sound, LED
Hardware configurator: System settings > Sound, LED
Description
Sound
Setup Item Selectable Range or Options Default Value
Touch Off, On On
Warning Off, On Off
Touch
Set this to On to play touch operation sounds.
Warning
Set this to On to play a warning sound when an alarm occurs.
1.18 Configuring System Settings (Time zone, display language, status relay, etc.)