Ftp connection primary, Ftp connection secondary – Yokogawa Touch Screen GP20 User Manual
Page 140
1-126
IM 04L51B01-01EN
FTP connection Primary
1
Setup Item
Selectable Range or Options
Default Value
FTP server name
Character string (up to 64,
A a # 1
)
—
Port number
Numeric value (1 to 65535)
21
User name
Character string (up to 32,
A a # 1
)
—
Password
Character string (up to 32,
A a # 1
)
—
Directory
Character string (up to 64,
A a # 1
)
—
PASV mode
Off, On
Off
1 Appears when the FTP client function is set to
On. You cannot change this item from the Web
browser.
FTP server name
Set the name of the FTP server to transfer files to.
If the DNS is available, you can set the host name as a server name.
You can also set the IP address. In this case, the DNS is not required.
For details on DNS, see page 1-123 in section 1.16.1, “Setting Basic Communication
Port number
Set the port number of the FTP server to transfer files to.
User name
Set the user name (login name) for accessing the FTP server.
Password
Set the password for accessing the FTP server.
Directory
Set the directory of the file transfer destination. The delimiter for directories varies depending
on the implementation of the destination FTP server.
Example: When transferring files to the “data” directory in the “home” directory of an FTP
server on a UNIX file system.
/home/data
PASV mode
Set this to
On when using the GX/GP behind a firewall that requires the PASV mode.
FTP connection Secondary
Configure the secondary FTP server. The settings are the same as those for “FTP
connection Primary.”
1.16 Configuring the Ethernet Communication Function