Yokogawa Touch Screen GP20 - Manual (Page 372)

5-18
IM 04L51B01-01EN
Warning Messages
Code Title Description and Corrective Action
Message
W8101 Clear the editing This confirmation message appears when you edit
settings and try to move to a different setting screen
without clicking Update Config.
Are you sure you want to clear the edited
content?
W8102 Reload configuration This confirmation message appears when you try to
change the language setting.
If the display language is changed, the page will
be reloaded.
W8103 Update configuration This confirmation message appears when you click
Update Config. in a setting screen.
Are you sure you want to update the hardware
configuration?
W8104 Update configuration This confirmation message appears after you change
the settings when the GX/GP needs to restart.
Restart is required to reflect this changes.
Continue?
W8105 Reload configuration This confirmation message appears when you click
Reload in a setting screen.
Are you sure you want to clear the edited
contents by reloading the configuration?
W8106 Destruction of editing This message appears for you to confirm whether
to discard the current monitor and move to different
content. If you want to save the monitor configuration,
register the monitor as a favorite monitor, and then
move to different content.
Are you sure you want to clear the edited
monitor?
W8107 Login user changed Due to a change in the user registration settings on the
GX/GP, an authentication procedure has occurred while
the Web application was running, and as a result, the
login user has changed. Click OK to reload the page.
Login user has chanded. The page will be
reloaded.
W8108 Hardware configuration This message appears on the system information
screen or network information screen when the system
configuration changes on the GX/GP. Click OK to
update the information.
Hardware system configuration has changed. The
information will be updated.
W8109 Limit of configuration editing This message appears when setting parameters are
loaded. It indicates that restrictions will be placed on the
configuration capabilities due to the GX/GP condition or
design limitations of the Web application.
This configuration includes contents that could
not be changed.
Auxiliary Message
1 The hardware is recording data or executing
math, so the configuration cannot upload.
2 The configuration you are loading includes
the contents that cannot be changed from the
web application.
W8110 Limit of configuration editing This message appears when settings are being
displayed. It indicates that restrictions will be placed on
the configuration capabilities due to changes in the GX/
GP condition.
The hardware was operated, so this operation will
affect the configuration.
Auxiliary Message
1 The hardware is recording data or executing
math, so the configuration cannot upload.
2 The hardware was operated. The
configuration is not fully compatible with the
existing configuration of hardware.
W8701 Favorite monitor This message confirms whether it is okay to overwrite
an existing favorite monitor. If you do not want to
overwrite, click Cancel, and then register with a
different name.
The monitor with the same name already exists.
Do you want to overwrite it?
W8702 Favorite monitor This message confirms whether it is okay to delete
a favorite monitor. The “%s” section will contain the
favorite monitor name.
Are you sure you want to delete \%s\"?"
5.2 Troubleshooting