Yokogawa Touch Screen GP20 - Manual (Page 261)

3-9
IM 04L51B01-01EN
Using Network Functions (Ethernet interface)
1
2
3
4
5
App
3.1.3 Controlling the GX/GP
You can carry out the following operations on the Web application.
• Start and stop recording
• Start, stop, reset, and acknowledge computing
• AlarmACK
• Start and stop mail transmission
• Trigger the starting of event data recording
• Reset relative timers
• Reset match time timers
• Change a batch number, lot number, and batch comment
• Enter batch text
• Change the time using SNTP
• Write messages
Use the following buttons.
If an operation cannot be carried out from the GX/GP, it will not be possible from the Web
application either. For operations that cannot be carried out, the corresponding buttons will
not be displayed or will not be selectable.
• If the GX/GP does not have the function or is not using the function.
• User restriction is placed on the operation.
• The GX/GP is not in a condition to accept the operation. For example, if the GX/GP is not
recording, you cannot write a message.
Note
The following alternate screen may appear temporarily during operation. This is not an error.
3.1 Using a Web Browser to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)