Watlow Series D8 - Manual (Page 67)

Series D8 User’s Guide Chapter 3: Communicating by DeviceNet
Doc. 0600-3120-2000 Watlow Anafaze 49
A. Registered without the Watlow EDS B. Registered with the Watlow EDS
Figure 3.3 D8 Properties in RSNetWorx
The Parameters tab provides access to all of the D8 control-
ler's parameters. See Figure 3.4. Some of these parameters
have read-only access and some have read-and-write access.
This tab can be a valuable tool for configuring the D8. With-
out the Watlow EDS file all configuration must be done
through the front panel of the controller or via explicit mes-
sages initiated through a PLC or other device passed through
a scanner (DeviceNet master).