Watlow Series D8 User Manual
Page 17
Series D8 User’s Guide
List of Tables
Doc.0600-3120-2000
Watlow Anafaze
xv
Table 6.5—Power Up Loop Modes 128
Table 6.6—Digital Output Alarm Polarity 130
Table 6.7—Input Types and Ranges 131
Table 6.8—Characters for the Loop Name and Input Units Parameters 132
Table 6.9—Calibration Offset Ranges 133
Table 6.10—Display Formats 134
Table 6.11—Proportional Band Values 136
Table 6.12—Values for the Control Hysteresis and Deviation Alarm Parameters 138
Table 6.13—Heat and Cool Output Types 139
Table 6.14—Alarm Functions 144
Table 6.15—Values for Alarm Hysteresis 147
Table 6.16—Bit Positions for Alarm Enable and Alarm Function 154
Table 6.17—Bit Positions for Alarm Status and Alarm Acknowledge 155
Table 6.18—System Status Bits 155
Table 6.19—DeviceNet Value for Watchdog Inactivity Fault 156
7 Troubleshooting and Reconfiguring
Table 7.1—Operator Response to Process Alarms 160
Table 7.3—Module Status Indicator States and Descriptions 162
Table 7.4—Network Status Indicator Light 163
Table 7.5—Resistor Values for Current Inputs 173
Table 7.6—Resistor Locations for Current Inputs 173
Table 7.7—Resistor Values for Voltage Inputs 174
Table 7.8—Resistor Locations for Voltage Inputs 174
Table 7.9—Resistor Locations for RTD Inputs 175
Table 7.10—Dual DAC Jumper Settings 177
Table 8.1— Agency Approvals / Compliance 179
Table 8.2—Environmental Specifications 179
Table 8.3—D8 with Straight SCSI 180
Table 8.5—TB50 Physical Dimensions 181
Table 8.6—TB50 Connections 182
Table 8.7—TB50 with Straight SCSI 182
Table 8.8—TB50 with Right Angle SCSI 183
Table 8.10—Thermocouple Range and Resolution 186
Table 8.11—RTD Range and Resolution 186
Table 8.12—Input Resistance for Voltage Inputs 186
Table 8.14—Digital Outputs Control / Alarm 188
Table 8.15—5 Vdc Output (Power to Operate Solid-State Relays) 188
Table 8.17—D8 Power Requirements 188