Power connections, Wiring the power supply, Power connections 23 – Watlow Series D8 User Manual
Page 41: Wiring the power supply 23, Figure 2.11—d8 series controller with tb50 23
Series D8 User’s Guide
Chapter 2: Installation
Doc. 0600-3120-2000
Watlow Anafaze
23
The best way to avoid ground loops is to minimize unneces-
sary connections to ground. Do not connect any of the follow-
ing terminals to earth ground:
•
Power supply dc common
•
TB1 terminals 9, 10, 19 (analog common)
•
TB2 terminal 2 (dc power common)
Do not connect the analog common terminals to the other ter-
minals listed above.
Power Connections
This section explains how to make power connections to the
D8 and the TB50.
Figure 2.11 D8 Series Controller with TB50
Wiring the Power Supply
WARNING!
Use a power supply with a Class 2 rating
only. UL approval requires a Class 2 power
supply.
Connect power to the controller before any other connections,
This allows you to ensure that the controller is working before
any time is taken installing inputs and outputs.
CONNECTOR
DEVICENET
NETWORK LED
INDICATOR LIGHT
MODULE LED
INDICATOR LIGHT
- 12LS Controller (111 pages)
- 8LS Controller (140 pages)
- 8PID Controller (55 pages)
- Addendum to EZwarePlus (50 pages)
- ANASCAN (62 pages)
- ANASOFT (95 pages)
- ANAWIN 2 (154 pages)
- ANAWIN 3 (23 pages)
- Calibrating Watlow Series 988 Family Process Controls (19 pages)
- CAS (98 pages)
- CAS200 (124 pages)
- CLS (180 pages)
- CLS200 (251 pages)
- CLS200, MLS300 and CAS200 (92 pages)
- Control Console (12 pages)
- CPC400 (230 pages)
- DIN-A-MITE Style A (9 pages)
- DIN-A-MITE Style B (14 pages)
- DIN-A-MITE Style C (22 pages)
- DIN-A-MITE Style D (9 pages)
- DIN-Mount Adapter Instruction Sheet, Rev A (1 page)
- Dual DAC (4 pages)
- EM Gateway (28 pages)
- E-Safe Hybrid Relay Rev B (4 pages)
- E-SAFE II Hybrid Power Switch (4 pages)
- EZwarePlus Programming (264 pages)
- EZ-ZONE PM (111 pages)
- EZ-ZONE PM PID (125 pages)
- EZ-ZONE PM Express Limit (34 pages)
- EZ-ZONE PM Express (35 pages)
- EZ-ZONE PM Integrated Controller (181 pages)
- EZ-ZONE RM Limit Module Rev C (127 pages)
- EZ-ZONE RMA Modul (79 pages)
- EZ-ZONE RMC (236 pages)
- EZ-ZONE RME (124 pages)
- EZ-ZONE RMH (161 pages)
- EZ-ZONE RUI/Gateway (62 pages)
- EZ-ZONE RM-Scanner-Modul (140 pages)
- EZ-ZONE ST (97 pages)
- F4 External Event Board - Rev.B (2 pages)
- HG Series Mercury Displacement Relay (6 pages)
- LogicPro (296 pages)
- Mercury Relay or MDR Retrofit (13 pages)
- MICRODIN (24 pages)
- MICRODIN (106 pages)