ALLIED Vision Technologies Stingray F-504 - Manual (Page 311)

Configuration of the camera
STINGRAY Technical Manual V4.4.4
309
3. Poll the SHDG_CTRL register until the Busy and BuildImage flags are
reset automatically.
The maximum value of GrabCount depends on the camera type and the num-
ber of available image buffers. GrabCount is automatically adjusted to a
power of two.
Do not poll the SHDG_CTRL register too often, while automatic generation is
in progress. Each poll delays the process of generating the shading image.
An optimal poll interval time is 500 ms.
Memory channel error codes
ID Error description
0x00 No error
0x01 Memory detection error
0x02 Memory size error
0x03 Memory erase error
0x04 Memory write error
0x05 Memory header write error
0x0F Memory channel out of range
Table 139: Memory channel error description