ALLIED Vision Technologies Stingray F-504 - Manual (Page 241)

Video formats, modes and bandwidth
STINGRAY Technical Manual V4.4.4
239
As a reference it uses a grid of up to 65534 sample points equally spread over
the AOI.
Note

Autofunction AOI is independent from Format_7 AOI set-
tings.
If you switch off autofunction AOI, work area position and
work area size follow the current active image size.
To switch off autofunctions, carry out following actions in
the order shown:
1. Uncheck Show AOI check box (SmartView Ctrl2 tab).
2. Uncheck Enable check box (SmartView Ctrl2 tab).
Switch off Auto modi (e.g. Shutter and/or Gain)
(SmartView Ctrl2 tab).
Note

Configuration
To configure this feature in an advanced register see
Chapter
Autofunction AOI on page 317.