ALLIED Vision Technologies Guppy PRO F-503 User Manual
Technical manual, Avt guppy pro
This manual is related to the following products:
Table of contents
Document Outline
- Contacting Allied Vision Technologies
- Introduction
- Guppy PRO cameras
- Conformity
- FireWire
- Overview
- FireWire in detail
- Serial bus
- FireWire connection capabilities
- Capabilities of 1394a (FireWire 400)
- Capabilities of 1394b (FireWire 800)
- Compatibility between 1394a and 1394b
- Image transfer via 1394a and 1394b
- 1394b bandwidths
- FireWire Plug & play capabilities
- FireWire hot-plug and screw-lock precautions
- Operating system support
- Filter and lenses
- Specifications
- Camera dimensions
- Camera interfaces
- Description of the data path
- Block diagrams of the cameras
- White balance
- Auto shutter
- Auto gain
- Manual gain
- Brightness (black level or offset)
- Mirror function (only Guppy PRO F-503)
- Look-up table (LUT) and gamma function
- Defect pixel correction (only Guppy PRO F-503B/C)
- Binning (only b/w cameras; F-503: also color cameras)
- Sub-sampling (only F-503B/C and CCD cameras b/w)
- Binning and sub-sampling access (F-503 only)
- Packed 12-Bit Mode
- Color interpolation (BAYER demosaicing)
- Hue and saturation
- Color correction
- Color conversion (RGB to YUV)
- Bulk Trigger
- Level Trigger
- Controlling image capture
- Video formats, modes and bandwidth
- Guppy PRO F-031B / Guppy PRO F-031C
- Guppy PRO F-032B / Guppy PRO F-032C
- Guppy PRO F-033B / Guppy PRO F-033C
- Guppy PRO F-046B / Guppy PRO F-046C
- Guppy PRO F-095C
- Guppy PRO F-125B / Guppy PRO F-125C
- Guppy PRO F-146B / Guppy PRO F-146C
- Guppy PRO F-201B / Guppy PRO F-201C
- Guppy PRO F-503B / Guppy PRO F-503C
- Area of interest (AOI)
- Frame rates
- Frame rates Format_7
- Guppy PRO F-031: AOI frame rates
- Guppy PRO F-032: AOI frame rates
- Guppy PRO F-033: AOI frame rates
- Guppy PRO F-046: AOI frame rates
- Guppy PRO F-095: AOI frame rates
- Guppy PRO F-125: AOI frame rates
- Guppy PRO F-146: AOI frame rates
- Guppy PRO F-201: AOI frame rates
- Guppy PRO F-503: AOI frame rates
- How does bandwidth affect the frame rate?
- Configuration of the camera
- Camera_Status_Register
- Configuration ROM
- Implemented registers (IIDC V1.31)
- Camera initialize register
- Inquiry register for video format
- Inquiry register for video mode
- Inquiry register for video frame rate and base address
- Inquiry register for basic function
- Inquiry register for feature presence
- Inquiry register for feature elements
- Status and control registers for camera
- Inquiry register for absolute value CSR offset address
- Status and control register for one-push
- Feature control error status register
- Video mode control and status registers for Format_7
- Advanced features (AVT-specific)
- Advanced registers summary
- Extended version information register
- Advanced feature inquiry
- Camera status
- Maximum resolution
- Time base
- Extended shutter
- Test images
- Look-up tables (LUT)
- Defect pixel correction
- Input/output pin control
- Delayed Integration Enable (IntEna)
- Auto shutter control
- Auto gain control
- Autofunction AOI
- Color correction
- Trigger delay
- Mirror image
- Soft reset
- Maximum ISO packet size
- Format_7 mode mapping (only Guppy PRO F-503)
- Low-noise binning mode (2 x and 4 x binning) (only Guppy PRO F-503)
- Software feature control (disable LED)
- User profiles
- Pulse-width modulation (PWM)
- Global reset release shutter (only Guppy PRO F-503)
- GPDATA_BUFFER
- Firmware update
- Appendix
- Index