ALLIED Vision Technologies Stingray F-504 - Manual (Page 128)

Description of the data path
STINGRAY Technical Manual V4.4.4
126
Register Name Field Bit Description
0xF0F00804 AUTO_EXPOSURE Presence_Inq [0] Presence of this feature:

0: N/A

1: Available
Abs_Control [1] Absolute value control

O: Control with value in the value field

1: Control with value in the absolute
value CSR

If this bit=1 the value in the value field
has to be ignored.
--- [2..4] Reserved
One_Push [5] Write: Set bit high to star

Read: Status of the feature:
Bit high: WIP
Bit low: Ready
ON_OFF [6] Write: ON or OFF this feature
Read: read a status
0: OFF

1: ON
A_M_MODE [7] Write: set mode

Read: read current mode
0: MANUAL

1: AUTO
--- [8..19] Reserved
Value [20..31] Read/Write Value
This field is ignored when writing the
value in Auto or OFF mode.
If readout capability is not available,
reading this field has no meaning.
Table 43: CSR: Auto Exposure
Note

Configuration
To configure this feature in an advanced register: See
Table 145: Advanced register: Auto gain control on page
316.