Tektronix MTG100 - Manual (Page 80)

Pull-down Menus
MTG100 & MTG300 MPEG Generator User Manual
3Ć21
If you connect the MPEG generator to your local Ethernet network, you can
access the MPEG generator using any PC on the network running the
MTG Comm
+ application.
CAUTION. To prevent communication conflicts on your network, ask your local
network administrator for the correct numbers to enter in the Network dialog
box if you connect the MPEG generator to your local Ethernet network.
Table 3Ć20: Network dialog box parameters
Parameter Description
DHCP Client Sets valid or invalid IP address settings by DHCP (Dynamic Host
Configuration Protocol). You can select Disable or Enable. If you set it to
Enable, the MPEG generator functions as a DHCP client. In this case,
you can register the addresses such as the IP address and subnet mask
used by the MPEG generator. This way, the MPEG generator accesses
the DHCP server and gets the addresses automatically when connected
to the network.
If you set it to Disable, you will need to set address values in each of the
menu items described below.
NOTE: Under some networkenvironments, the MPEG generator may
not be able to get the IP adress automatically from a DHCP server. In
this case, you need set the following parameters.
IP Address Sets the IP address of the MPEG generator. If the DHCP Client
parameter is set to Enable, the IP address automatically obtained from
the DHCP server is used.
Subnet Mask Sets the subnet address for the MPEG generator. If the DHCP Client
parameter is set to Enable, the subnet address automatically obtained
from the DHCP server is used.
Routing Destination Sets a routing destination address for the MPEG generator on your
Ethernet network. If the DHCP Client parameter is set to Enable, the
destination address automatically obtained from the DHCP server is
used.
Routing Gateway Sets the gateway address to be used by the MPEG generator on your
Ethernet network. Enter the address of a gateway when the remote
computer is connecting to the MPEG generator through another network
that is connected to your Ethernet networkthrough a gateway.
MAC address Displays the Media Access Control adress of the MPEG generator.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com