Tektronix MTG100 User Manual
Page 170
Appendix A: Specifications
MTG100 & MTG300 MPEG Generator User Manual
AĆ7
Table AĆ2: Electrical characteristics (Cont.)
Characteristics
Description
Rise/fall time (20% to 80%)
t 1.2 ns
Transmission format
Data packets (Insert Packet unit), Data Bursts (Insert Word unit)
SSI output
Complies with SMPTE 310M.
Connector type
BNC
Impedance
75 W
Data rate
1 Mbps to 40 Mbps (Not managed when the data frequency is more than 40 Mbps.)
Output voltage
800 mV
±
10 %
Return loss
u 30 dB , 100 kHz to 80 MHz
Drift and wander
t 0.028 ppm/s, t 1 kHz
Jitter
t 2 ns, 1 kHz to 800 kHz
Rise/fall time (20 % to 80%)
0.4 ns to 5.0 ns
t 1.6 ns (difference between rise and fall time)
Condition
This output cannot be used with the external clock input.
Display
Display area
Width:
13.2 cm (5.2 inches)
Height:
9.9 cm (3.9 inches)
Resolution
Horizontal: 640 pixels
Vertical:
480 pixels
AC line power
Rating Voltage
100 to 240 VAC
Voltage Range
90 to 250 VAC
Frequency Range
48 to 63 Hz
Maximum power
200 W
Maximum current
2 A
Installation Category
CAT II
Table AĆ3: Mechanical characteristics
Characteristics
Description
Netweight
Standard
Approximately 14 kg
Dimensions
Height
132 mm (without front feet extended)
Width
430 mm
Length
560 mm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com