Functional check procedure – Tektronix MTG100 User Manual
Page 31
Getting Started
1Ć10
MTG100 & MTG300 MPEG Generator User Manual
Functional Check Procedure
Perform the following procedure if you are operating the instrument for the first
time (to verify that the instrument shipped without damage) or you suspect that
the instrument is not working properly:
NOTE. Before you perform this procedure, install the MPEG generator following
the instructions listed in Installation starting on page 1-6.
1. Connect the MPEG generator to a power source, and then turn the instru-
ment on using the power switches.
2. Press the front-panel MENU button to enable the pull-down menu display.
When the pull-down menus are enabled, the name of the selected pull-down
menu is highlighted.
3. Use the left and right arrow buttons to select the FILE pull-down menu.
4. Use the rotary knob or the arrow buttons to select Open TS File... from the
menu, and then press the OK bezel button to open the dialog box shown in
Figure 1-3.
5. Use the rotary knob or the arrow buttons to select the test64.trp file, and
then press the OK bezel button. The hierarchy view of the transport stream
file will be displayed on the screen.
Figure 1Ć3: Select TS File dialog box
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com