Tektronix MTG100 User Manual
Page 214
Appendix C: Using the ReMux Application
MTG100 & MTG300 MPEG Generator User Manual
CĆ15
Editing the TMCC Information for the Transport Stream.
10. Double-click the TMCC icon to open the Edit TMCC Information dialog
box for editing the TMCC information for the transport stream (See
Figure C-11).
Figure CĆ11: Edit TMCC Information dialog box(MĆTMCC)
In this dialog box, you can set the following parameters:
H Order of Change: Sets the TMCC change instruction. You can set the value
in the range of 0 to 31.
H Transmitter/Receiver Control Information: Sets the transmission/receiv-
ing control information.
H Switch On Control Signal: Sets the control signal on (1) or off (0).
H Up-Link Control: Controls the up-link switching.
H Extended Information: Sets the extended information. When you set the
Flag ( extension flag) item to 1, the Field item becomes active.
11. After you change the parameters, click the OK button to confirm the changes
and close the dialog box.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com