Initial product inspection – Tektronix MTG100 User Manual
Page 25
Getting Started
1Ć4
MTG100 & MTG300 MPEG Generator User Manual
Initial Product Inspection
Perform the following product inspection procedure when you initially receive
your instrument:
1. Inspect the MPEG generator shipping carton for external damage, which
indicates possible damage to the instrument.
2. Remove the MPEG generator from the shipping carton, and then check that
the instrument has not been damaged in transit. Prior to shipment the
instrument is thoroughly inspected for mechanical defects. The exterior
should not have any scratches or impact marks.
NOTE. Save the shipping carton and packaging materials for instrument
repackaging in case shipment becomes necessary.
3. Verify that the shipping carton contains the basic instrument, the standard
accessories listed in Table 1-2, and any optional accessories that you ordered.
4. After you install the MPEG generator (refer to Installation on page 1-6),
you can perform the performance verification procedure in Appendix D:
Performance Verification if you want to verify that the instrument performs
to the specifications listed in Appendix A: Specifications.
Contact your local Tektronix Field Office or representative if there is a problem
with your instrument or if your shipment is incomplete.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com