Outputting a transport stream – Tektronix MTG100 User Manual
Page 51
Tutorials
2Ć18
MTG100 & MTG300 MPEG Generator User Manual
Outputting a Transport Stream
The hard disk drive of the MPEG generator is shipped with files containing
factory-supplied samples of transport streams. This tutorial opens one of these
sample files and outputs the transport stream.
Perform the following steps to select and output a stored transport stream:
1. Press the front-panel MENU button to enable the pull-down menu display.
When the pull-down menus are enabled, the name of the selected pull-down
menu is highlighted.
2. Use the left and right arrow buttons to select the FILE pull-down menu.
3. Use the rotary knob or the up and down arrow buttons to select Open TS
File... from the menu, and then press the OK bezel button to open the dialog
box shown in Figure 2-13.
Figure 2Ć13: Select TS File dialog box
4. Use the rotary knob or the arrow buttons to select the test64.trp file, and
then press the OK bezel button. This displays the hierarchy view of the
transport stream file shown in Figure 2-14.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com