Tektronix MTG100 - Manual (Page 42)

Operating Basics
MTG100 & MTG300 MPEG Generator User Manual
2Ć9
Using the Menu System
This section describes the basics of using the MPEG generator’s menu system
and the methods for entering numeric and text input in the various dialog boxes.
The menu system on the MPEG generator provides access to instrument settings
and to operational functions such as the selection of transport stream output
parameters. The menu system is comprised of two types of menus: the four
pull-down menus displayed in the Menu bar and the Bezel menu which is
displayed at the right side of the screen (see Figure 2-3 on page 2-7).
The pull-down menus are displayed in the Menu bar at the top of the screen. You
can operate these menus using the front panel MENU button, the right and left
control buttons, the arrow buttons, and the rotary knob (see Figure 2-5).
Accessing PullĆdown Menu Commands. The MENU button toggles display
control between the Icon cursor (used to select icons in the hierarchy display)
and the pull-down menus. When the Icon cursor is enabled (displayed), press the
MENU button to enable the pull-down menus. When the pull-down menus are
enabled or displayed, press the MENU button to close any open pull-down menu
and to enable (display) the Icon cursor.
When the pull-down menus are enabled, the Icon cursor is not displayed and the
currently selected pull-down menu name is highlighted in the Menu bar. Use the
left and right arrow buttons to select (highlight) the desired pull-down menu
(see Figure 2-6).
MENU
button
Á
Left control
button
Right control
button
Arrow buttons
Rotary knob
Figure 2Ć5: Front panel showing the pullĆdown menu controls
PullĆdown Menus
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com