Tektronix MTG100 - Manual (Page 71)

Pull-down Menus
3Ć12
MTG100 & MTG300 MPEG Generator User Manual
Table 3Ć11: Bezel menu commands for the PCR Start Value dialog box
Command Description
Default Resets all of the dialog box settings back to the factory default settings.
Cancel Cancels any setting changes and closes the dialog box.
OK Enables all setting changes. When you apply setting changes, data output
from the MPEG generator is stopped. You must restart the MPEG generator
output for the setting changes to appear.
When you select the Insert Section/TS... command from the CONFIG pull-down
menu, or you select INS_SI... from the Bezel menu of a selected INS_SI icon in
the hierarchy display, or you select INS_TS... from the Bezel menu of a selected
INS_TS icon in the hierarchy display, the Insertion Setup dialog box appears as
shown in Figure 3-5. Use the arrow buttons to highlight a parameter, and then
use the rotary knob or hexadecimal keypad to set the value. Press the Apply
bezel button to apply changes.
Table 3-12 describes the Insertion Setup dialog box parameters and Table 3-13
describes the Bezel menu commands associated with the dialog box.
Figure 3Ć5: Insertion Setup dialog box
Insertion Setup Dialog
Box (MTG300 Only)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com