Tektronix MTG100 - Manual (Page 120)

Hierarchy Display
MTG100 & MTG300 MPEG Generator User Manual
3Ć61
Table 3Ć72: ECM icon Bezel menu commands (MTG300 only) (Cont.)
Command Description
Stress SI...
(Section data only)
Changes the status of the section header in the ECM.
When you select this menu item, the Stress SI dialog box appears.
Refer to Stress SI Dialog Box on page 3Ć61 for more information.
Del Packet Toggles the Delete Packet function between Inactive and Active.
Inactive: Cancels the delete packet operation.
Active: Deletes the selected itemfromthe transport stream. If other
items with the same PID value as the selected item exist in the transport
streamand they are contained in one packet, they are also deleted from
the transport stream(except for the PCR). When the itemis deleted, the
iteminformation is shaded in the hierarchy display.
Stress SI Dialog Box. When you select the Stress SI... command from the Bezel
menu on your MTG300 MPEG generator, the Stress SI dialog box appears as
shown in Figure 3-22. This function is available only when the dialog box is
displayed.
The Reserved parameter selects whether the value 00 or 11 (binary) is written in
the reserved bits.
Table 3-73 describes the Bezel menu commands associated with the dialog box.
Figure 3Ć22: Stress SI dialog box
Table 3Ć73: Bezel menu commands for the Stress SI dialog box
Command Description
Default Resets the setting to the factory default setting.
Exit Menu Cancels the setting and closes the dialog box.
Apply Applies the setting to the transport streamoutput.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com